DIN Rail LED DALI Dimmer Controller for Smart Lighting Control Solution
Smart Lighting Control System Solution
1. Cost and time advantages in planning, installation, commissioning and reprogramming
2. Improves comfort.
3. High flexibility, extense function at any time
4. DIN rail components and surface mounted devices
5. Input and output combinated various devices.
6. All loads in the room (lights, blinds, heating, etc.) can be controlled using a central device
DIN Rail DALI Master Controller Specifications
| NET | (2) 4-pin 3.81mm detachable terminal blocks, paralleled |
| OVERRIDE | (1) 2-pin 3.81mm detachable terminal blocks.Sensing input for external low-voltage contact closure; Activates override mode when a closure is present, forces each ballast into its defined “System Failure Level” |
| Minimum Closure Rating | 10mA (per module) at 24 Volts |
| DALI Interface | (1) 2-pin 7.62mm terminal blocks Each channel controls a single DALI loop (up to 64 ballasts); |
| COMPUTER | 1) USB Type B female, USB 1.1 computer console port |
| TEST | (6) miniature pushbuttons for testing on/off and dim up/down for all attached ballasts in channel |
| DALI POWER | (1) 2-position switch, sets DALI power between internal (INT) and external (EXT); When set to “INT” DALI uses power supplied by the DIN-DALI; When set to “EXT” DALI uses power provided by external power supply (not included) |
| LCD Panel | (1) LCD Display Panel for Used for displaying various equipment information and operation status information |
| PWR | (1)Green LED, illuminates when DC power is a applied to the NET port |
| NET | (1)Yellow LED, Indicates communication with an external control processor |
DIN Rail DALI Master Controller Application
> Support a DALI bus, most allow linking 64 DALI lighting equipment
> With USB and DC-NET(RS-485) communication interface
> Scan equipments, meet the requirement of automatic address assignment of DALI agreement and there are 3 ways to assign address
> All the parameters of the parameters table of DALI agreement can be read or set.
> Support Setting / reading by group;
> Integrated DALI power supply
> Support Scene values can be set/read.
> 8M wide DIN rail mounting
DC-NET
The DIN-DALI communicates with a DIN-CP1 Automation Processor, or other Third-Party control systems, via the DC-NET control network A pair of DC-NET ports on the DIN-DALI allows for easy daisy-chaining of several DIN Rail Series automation control modules.
DIN Rail DALI Master Controller Installation
The DIN-DALI is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When the DIN-DALI is installed in an enclosure utilizing 45 mm cutouts, the front panel stays accessible while the connections are concealed.
DIN Rail DALI Master Controller Production Line
Company Profile
Okystar Technology Co., Ltd is subsidiary of Okystar Technology Group Co., Ltd, which holds 4 subsidiary companies and more than 100 skilled workers,5. technicians.Okystar Tech Co.,Ltd was built in 2004.We mainly manufacture and export lighting control system including DALI, 0-10V, Leading / Trailing Edge Dimmer, Programmable Touch Panel and etc.
After 10 years development, our company has grown into a large high-tech group corporation integrated industry, technology and trading. With electronic information industry as our main business, we keep being top 10 in the board, shield, sensor, modules. Now we launch new lighting control system module which will keep our competitiveness in the market.
Exhibition
DIN Rail DALI Master Controller Packing & Shipping
FAQ
1. What is intelligent lighting control system?
A lighting control system is an intelligent network based lighting control solution that incorporates communication between various system inputs and outputs related to lighting control with the use of one or more central computing devices. Lighting control systems are widely used on both indoor and outdoor lighting of commercial, industrial, and residential spaces.
2. What is the advantage compare with the traditional lighting control?
Improve energy efficiency
Reduce maintenance cost
Easy operation and more convenient
3. What Okystar can supply for you?
Okystar can offer a whole solution of lighting control system for you, economic and customization, with industrial-grade design, product architecture in line with international electrical standards, using high-quality components, products are stable and reliable.
Product Tags:
|
|
2 Watts DIN Rail LED DALI Dimmer Controller For Smart Lighting Control Solution Images
|
